Cung cấp hệ thống điều khiển

product 1

Đội ngũ nhân sự chuyên nghiệp của A2S đã có nhiều năm kinh nghiệm trong thiếu kế, triển khai và thi công các ...

Bảo trì chuyên nghiệp

product 1

Dịch vụ sữa chữa bảo trì hệ thống của A2S giúp quý khách hàng giảm bớt nỗi lo âu về tính ổn định...

Thiết bị điện, tự động hóa

product 1

Không chỉ cung cấp giải pháp thiết kế, sữa chữa, bảo trì, A2S còn là nhà phân phối các hãng thiết bị...

Người theo dõi

Được tạo bởi Blogger.

Cảm biến áp suất PE3004

Unknown | 00:19 | 0 nhận xét

Product characteristics
Combined pressure sensor
Connector
Sealing of the measuring cell: EPDM
Function programmable
Process connection: G ¼ I
Switching output,
analogue output (0 bar = 4 mA / 0 V; 10 bar = 20 mA / 10 V)
4-digit alphanumeric display
Measuring range: -1...10 bar / -14.5...145 psi / -0.1...1.0 MPa
 Application
Application Type of pressure: relative pressure
Liquids and gases
Cannot be used for oils
Pressure rating 75 bar1087 psi7.5 MPa
Bursting pressure min. 150 bar2175 psi15 MPa
Medium temperature [°C] -25...80
 Electrical data
Electrical design DC PNP
Operating voltage [V] 18...36 DC ¹)
Current consumption [mA] < 50
Insulation resistance [MΩ] > 100 (500 V DC)
Protection class III
Reverse polarity protection yes
Overvoltage protection [V] up to 40 V
 Outputs
Output Switching output,
analogue output (0 bar = 4 mA / 0 V; 10 bar = 20 mA / 10 V)
Output function normally open / closed programmable; 4...20 mA or 0...10 V
Current rating [mA] 250
Voltage drop [V] < 2
Short-circuit protection pulsed
Switching frequency [Hz] ≤ 170
Analogue output 4...20 mA / 0...10 V
Max. load [Ω] 4...20 mA: max. 500 / 0...10 V: min. 2000
 Measuring / setting range
Measuring range -1...10 bar-14.5...145 psi-0.1...1.0 MPa
Setting range
Set point, SP -0.90...10.00 bar-12...145 psi-0.090...1.000 MPa
Reset point, rP -0.95...9.95 bar-13...144 psi-0.095...0.995 MPa
in steps of 0.05 bar1 psi0.005 MPa
Factory setting SP1 = 2.50 bar; rP1 = 2.30 bar
 Accuracy / deviations
Accuracy / deviations
(in % of the span)
Switch point accuracy < ± 0.5
Characteristics deviation *) < ± 0.25 (BFSL) / < ± 0.5 (LS)
Hysteresis < ± 0.25
Repeatability **) < ± 0.1
Long-term stability ***) < ± 0.05
Temperature coefficients (TEMPCO) in the temperature range -20...80° C (in % of the span per 10 K)
Greatest TEMPCO of the zero point 0.2
Greatest TEMPCO of the span 0.2
 Reaction times
Power-on delay time [s] 0.3
Delay time programmable dS, dr [s] 0; 0.2...50
Response time analogue output [ms] < 3
Integrated watchdog yes
 Software / programming
Programming options hysteresis / window function; N.O. / N.C; on delay, off delay; damping; display unit; current / voltage output
 Environment
Ambient temperature [°C] -20...80
Storage temperature [°C] -40...100
Protection IP 67
 Tests / approvals
EMC 
EN 61000-4-2 ESD: 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated: 10 V/m
EN 61000-4-4 Burst: 2 kV
EN 61000-4-5 Surge: 0.5/1 kV
EN 61000-4-6 HF conducted: 10 V
 
Shock resistance 
DIN IEC 68-2-27:50 g (11 ms)  
 
Vibration resistance 
DIN IEC 68-2-6:20 g (10...2000 Hz)  
 
MTTF [Years] 231
 Mechanical data
Process connection G ¼ I
Materials (wetted parts) stainless steel 316L / 1.4404; ceramics (99.9 % Al2 O3); EPDM
Housing materials stainless steel (304S15); stainless steel 316L / 1.4404; PC (Makrolon); PBT (Pocan); PEI; FPM (Viton); PTFE
Switching cycles min. 100 million
Weight [kg] 0.262
 Displays / operating elements
Display 
Display unit 3 x LED green
Switching status LED yellow
Function display 4-digit alphanumeric display
Measured values 4-digit alphanumeric display
 
 Electrical connection
Connection M12 connector; Gold-plated contacts
Wiring
 Remarks
Remarks 
¹) to EN50178, SELV, PELV
*) BFSL = Best Fit Straight Line / LS = Limit Value Setting
**) with temperature fluctuations < 10 K
***) in % of value of measuring range / 6 months
 
Pack quantity [piece] 1
Cảm biến áp suất PE3004

Chuyên mục:

0 nhận xét