STEP 7 V5.5 (Step 7 Professional 2010 Available Now)
SIEMENS SIMATIC STEP 7 v.5.5 (07/2010)
STEP 7 - is a basic software package, which includes in its membership the tools needed for programming and operation control systems, based on programmable controllers SIMATIC S7/C7, as well as computer control systems SIMATIC WinAC.
The package includes:
* STEP 7 V5.5
* ALM v5.0 SP1
A distinctive feature of the package STEP 7 is to develop complex automation projects based on the use of multiple programmable controllers, industrial computers, devices and systems, human-machine interface devices, distributed I / O, network structures of industrial relations. Tion Limited for the development of such projects are imposed only features programmers or computers that are running STEP 7.
STEP 7 tools allow you to:
* Configure and define the settings of equipment.
* Configure systems of industrial relations and setting parameters of data transmission.
* Programming, testing, debugging and running programs of individual automation systems, as well as their local or remote maintenance.
* Documenting and archiving project data.
* Operational management and diagnostic equipment.
STEP 7 supplied programmers SIMATIC Field PG and SIMATIC Power PG. It may come as a separate software package for personal computers running operating systems Windows 7 / XP PROF. To be able to connect programmable controllers, computer must be equipped with an MPI card or PC / MPI adapter and connecting cable.
STEP 7 provides parallel execution of work on one project by several developers. The only restriction in this case is the impossibility of simultaneous recording of data by multiple developers.
Set on / Install to Windows XP / Vista Home Edition
But you can install Step7 5.5 on Winows Home Premium / Home Basic at your own risk.
If you get this error message during installation
you should perform the following steps:
1. Copy installation files on your hard drive
2. Open file Setups.ini
3. Comment (put; in the beginning) the following row:
Code:
; WinXPExclude = 0, ...
; WinVistaExclude = SKU2; SKU3; SKU5; SKU8; SKU9; SKU10; SKU11; SKU12; SKU13; SKU14; SKU15; SKU16; SKU17; SKU18; SKU19; SKU20; SKU21; SKU22; SKU23; SKU24; SKU25
pic
Now you are able to install and use Step7 on Windows XP / Vista Home Basic and Vista Home Premium.
Russian wrote (a):
To install Step7 on Windows XP / Vista Home Basic and Vista Home Premium to:
1. Extract the service pack to your hard drive
2. Open the file Setups.ini
3. Find a terrible line
For Vista WinVistaExclude = SKU2; SKU3; SKU5; SKU8; SKU9; SKU10; SKU11; SKU12; SKU13; SKU14; SKU15; SKU16; SKU17; SKU18; SKU19; SKU20; SKU21; SKU22; SKU23; SKU24; SKU25
For HRyuni WinXPExclude = 0, ...
4. Placed at the beginning of this line, or simply delete it.
Everything is now possible to safely install and use Step7 on Vista Home Premium.
Compatible with only a 32-bit OS:
Windows XP Professional, Windows Server 2003,
Windows 7 (for the home version edit Setup.ini)
RAM RAM of 2 GB recommended
Year: 2010
Version: v5.5
Developer: SIEMENS A & D
Platform: x86 32-bit only
Medician: Activated sets of keys on request ALM or EKB_Install_2010
Link for download:
http://www.fileserve.com/file/dHVRmWy/S ... part01.rar
http://www.fileserve.com/file/xR6KsGn/S ... part02.rar
http://www.fileserve.com/file/fxqJKaH/S ... part03.rar
http://www.fileserve.com/file/E4tJ3dm/S ... part04.rar
http://www.fileserve.com/file/7vxzKR8/S ... part05.rar
http://www.fileserve.com/file/PHZwNTF/S ... part06.rar
http://www.fileserve.com/file/w5PGs8e/S ... part07.rar
http://www.fileserve.com/file/dTWpGZR/S ... part08.rar
http://www.fileserve.com/file/BpXGxGZ/S ... part09.rar
http://www.fileserve.com/file/7yeJ5sP/S ... part10.rar
http://www.fileserve.com/file/9RAvQwH/S ... part11.rar
http://www.fileserve.com/file/B2ET2u5/S ... part12.rar
http://www.fileserve.com/file/fuN2d63/S ... part13.rar
http://www.fileserve.com/file/AeF5ZpD/S ... part14.rar
STEP 7 - is a basic software package, which includes in its membership the tools needed for programming and operation control systems, based on programmable controllers SIMATIC S7/C7, as well as computer control systems SIMATIC WinAC.
The package includes:
* STEP 7 V5.5
* ALM v5.0 SP1
A distinctive feature of the package STEP 7 is to develop complex automation projects based on the use of multiple programmable controllers, industrial computers, devices and systems, human-machine interface devices, distributed I / O, network structures of industrial relations. Tion Limited for the development of such projects are imposed only features programmers or computers that are running STEP 7.
STEP 7 tools allow you to:
* Configure and define the settings of equipment.
* Configure systems of industrial relations and setting parameters of data transmission.
* Programming, testing, debugging and running programs of individual automation systems, as well as their local or remote maintenance.
* Documenting and archiving project data.
* Operational management and diagnostic equipment.
STEP 7 supplied programmers SIMATIC Field PG and SIMATIC Power PG. It may come as a separate software package for personal computers running operating systems Windows 7 / XP PROF. To be able to connect programmable controllers, computer must be equipped with an MPI card or PC / MPI adapter and connecting cable.
STEP 7 provides parallel execution of work on one project by several developers. The only restriction in this case is the impossibility of simultaneous recording of data by multiple developers.
Set on / Install to Windows XP / Vista Home Edition
But you can install Step7 5.5 on Winows Home Premium / Home Basic at your own risk.
If you get this error message during installation
you should perform the following steps:
1. Copy installation files on your hard drive
2. Open file Setups.ini
3. Comment (put; in the beginning) the following row:
Code:
; WinXPExclude = 0, ...
; WinVistaExclude = SKU2; SKU3; SKU5; SKU8; SKU9; SKU10; SKU11; SKU12; SKU13; SKU14; SKU15; SKU16; SKU17; SKU18; SKU19; SKU20; SKU21; SKU22; SKU23; SKU24; SKU25
pic
Now you are able to install and use Step7 on Windows XP / Vista Home Basic and Vista Home Premium.
Russian wrote (a):
To install Step7 on Windows XP / Vista Home Basic and Vista Home Premium to:
1. Extract the service pack to your hard drive
2. Open the file Setups.ini
3. Find a terrible line
For Vista WinVistaExclude = SKU2; SKU3; SKU5; SKU8; SKU9; SKU10; SKU11; SKU12; SKU13; SKU14; SKU15; SKU16; SKU17; SKU18; SKU19; SKU20; SKU21; SKU22; SKU23; SKU24; SKU25
For HRyuni WinXPExclude = 0, ...
4. Placed at the beginning of this line, or simply delete it.
Everything is now possible to safely install and use Step7 on Vista Home Premium.
Compatible with only a 32-bit OS:
Windows XP Professional, Windows Server 2003,
Windows 7 (for the home version edit Setup.ini)
RAM RAM of 2 GB recommended
Year: 2010
Version: v5.5
Developer: SIEMENS A & D
Platform: x86 32-bit only
Medician: Activated sets of keys on request ALM or EKB_Install_2010
Link for download:
http://www.fileserve.com/file/dHVRmWy/S ... part01.rar
http://www.fileserve.com/file/xR6KsGn/S ... part02.rar
http://www.fileserve.com/file/fxqJKaH/S ... part03.rar
http://www.fileserve.com/file/E4tJ3dm/S ... part04.rar
http://www.fileserve.com/file/7vxzKR8/S ... part05.rar
http://www.fileserve.com/file/PHZwNTF/S ... part06.rar
http://www.fileserve.com/file/w5PGs8e/S ... part07.rar
http://www.fileserve.com/file/dTWpGZR/S ... part08.rar
http://www.fileserve.com/file/BpXGxGZ/S ... part09.rar
http://www.fileserve.com/file/7yeJ5sP/S ... part10.rar
http://www.fileserve.com/file/9RAvQwH/S ... part11.rar
http://www.fileserve.com/file/B2ET2u5/S ... part12.rar
http://www.fileserve.com/file/fuN2d63/S ... part13.rar
http://www.fileserve.com/file/AeF5ZpD/S ... part14.rar
Hoặc Link này:
http://hotfile.com/dl/67548405/9e09e40/ ... 1.rar.html
http://hotfile.com/dl/67548565/8115caa/ ... 2.rar.html
http://hotfile.com/dl/67548475/c77a653/ ... 3.rar.html
http://hotfile.com/dl/67548556/41bb77d/ ... 4.rar.html
http://hotfile.com/dl/67548439/d7c954b/ ... 5.rar.html
http://hotfile.com/dl/67548641/7c804d6/ ... 6.rar.html
http://hotfile.com/dl/67548541/8aaae21/ ... 7.rar.html
http://hotfile.com/dl/67548609/3e09780/ ... 8.rar.html
http://hotfile.com/dl/67548468/a694486/ ... 9.rar.html
http://hotfile.com/dl/67548701/1547c9f/ ... 0.rar.html
http://hotfile.com/dl/67548573/8f46cc7/ ... 1.rar.html
http://hotfile.com/dl/67548656/efbb8e6/ ... 2.rar.html
http://hotfile.com/dl/67548489/f82bbd5/ ... 3.rar.html
http://hotfile.com/dl/67548712/2892922/ ... 4.rar.html
http://hotfile.com/dl/67548405/9e09e40/ ... 1.rar.html
http://hotfile.com/dl/67548565/8115caa/ ... 2.rar.html
http://hotfile.com/dl/67548475/c77a653/ ... 3.rar.html
http://hotfile.com/dl/67548556/41bb77d/ ... 4.rar.html
http://hotfile.com/dl/67548439/d7c954b/ ... 5.rar.html
http://hotfile.com/dl/67548641/7c804d6/ ... 6.rar.html
http://hotfile.com/dl/67548541/8aaae21/ ... 7.rar.html
http://hotfile.com/dl/67548609/3e09780/ ... 8.rar.html
http://hotfile.com/dl/67548468/a694486/ ... 9.rar.html
http://hotfile.com/dl/67548701/1547c9f/ ... 0.rar.html
http://hotfile.com/dl/67548573/8f46cc7/ ... 1.rar.html
http://hotfile.com/dl/67548656/efbb8e6/ ... 2.rar.html
http://hotfile.com/dl/67548489/f82bbd5/ ... 3.rar.html
http://hotfile.com/dl/67548712/2892922/ ... 4.rar.html
Chú ý:
Lúc cài nó có báo lỗi " Setup-frame not registered, contact local setup dealer" thì bạn đang bị lỗi.
Như vậy bạn sẽ bị hỏng luôn phần mềm Step7 có version cũ và không chạy được Simatic manager nữa.
Cách khắc phục:
Đọc hướng dẫn của file Readme cho kỹ!
Lúc cài nó có báo lỗi " Setup-frame not registered, contact local setup dealer" thì bạn đang bị lỗi.
Như vậy bạn sẽ bị hỏng luôn phần mềm Step7 có version cũ và không chạy được Simatic manager nữa.
Cách khắc phục:
Đọc hướng dẫn của file Readme cho kỹ!
Withimmediate effect, STEP 7 V5.5 has been
released for delivery. STEP 7 users can upgrade their existing STEP 7
software to the latest version by purchasing an upgrade (order no.
6ES7810-4CC10-0YE5). Users with a valid Software Update Service
agreement for STEP 7 will receive the upgrade to STEP 7 V5.5
automatically. STEP 7 V5.5 will also be included in the new STEP 7
Professional Edition 2010, which is expected to be available as from end
of August 2010. We shall inform you as soon as STEP 7 Professional 2010
becomes available.
Content:
-Ordering information for STEP 7 V5.5
-System requirements
-New features of STEP 7 V5.5
-Compatibility
-STEP 7 V5.4 - declared a mature product
-STEP 7 V5.3 - end of production
Note: ---> System requirements
Supported operating systems:
MS Windows XP Professional SP2 or SP3
MS Windows Server 2003 SP2 / R2 SP2 Standard Edition as workstation
MS Windows 7 32 Bit Ultimate, Professional and Enterprise (Standard Installation).
The Windows XP mode under Windows 7 is not release yet.
Windows 95 / 98 / Me / NT / Windows 2000 and Windows Vista are no longer supported.
Please note:
The Microsoft Internet Explorer 6.0 (or higher) is required for all operating systems.
In addition to STEP 7, the STEP 7 DVD contains the following programs with their setup in the directory CD2\Optional Components:
S7 Block Privacy for software block encryption
S7 Web2PLC for the integration of user-defined web sites in the CPU
More information is available from the file
Our Training Center can provide training for SIMATIC trend topics.Có một chú ý là phần mềm Step7 V5.5 yêu cầu RAM 2GB. Nếu máy nào có 2G RAM nhưng thực tế nó nhận được không được 2GB mà chỉ khoảng 1.9x GB.
Đây là cách làm để đủ điều kiện cài phần mềm nhé:
Trên Windows XP : Nhấp chuột phải vào MyComputer chọn thẻ Advance - Performance - Settings - Advanced - Virtual memory chọn Change - Custome size . Gõ số MB quy định (ví dụ 2403) vào ô inittial size và ô maximum size Ấn định bao nhiêu MB cho bộ nhớ ảo là tối ưu là được, thường thì khoảng gấp 2 lần dung lượng vật lý thực tế!
Content:
-Ordering information for STEP 7 V5.5
-System requirements
-New features of STEP 7 V5.5
-Compatibility
-STEP 7 V5.4 - declared a mature product
-STEP 7 V5.3 - end of production
Note: ---> System requirements
Supported operating systems:
MS Windows XP Professional SP2 or SP3
MS Windows Server 2003 SP2 / R2 SP2 Standard Edition as workstation
MS Windows 7 32 Bit Ultimate, Professional and Enterprise (Standard Installation).
The Windows XP mode under Windows 7 is not release yet.
Windows 95 / 98 / Me / NT / Windows 2000 and Windows Vista are no longer supported.
Please note:
The Microsoft Internet Explorer 6.0 (or higher) is required for all operating systems.
In addition to STEP 7, the STEP 7 DVD contains the following programs with their setup in the directory CD2\Optional Components:
S7 Block Privacy for software block encryption
S7 Web2PLC for the integration of user-defined web sites in the CPU
More information is available from the file
Our Training Center can provide training for SIMATIC trend topics.Có một chú ý là phần mềm Step7 V5.5 yêu cầu RAM 2GB. Nếu máy nào có 2G RAM nhưng thực tế nó nhận được không được 2GB mà chỉ khoảng 1.9x GB.
Đây là cách làm để đủ điều kiện cài phần mềm nhé:
Trên Windows XP : Nhấp chuột phải vào MyComputer chọn thẻ Advance - Performance - Settings - Advanced - Virtual memory chọn Change - Custome size . Gõ số MB quy định (ví dụ 2403) vào ô inittial size và ô maximum size Ấn định bao nhiêu MB cho bộ nhớ ảo là tối ưu là được, thường thì khoảng gấp 2 lần dung lượng vật lý thực tế!
License Step7 V5.5 nếu bạn cần nó thì download nó ở link dưới đây. Khi chạy chương trình nó sẽ nằm ở cuối cùng của license list!
http://www.mediafire.com/file/82bdsjbxb ... _03_20.rar
hoặc: http://www.mediafire.com/?82bdsjbxbwlrrcb
http://www.mediafire.com/file/82bdsjbxb ... _03_20.rar
hoặc: http://www.mediafire.com/?82bdsjbxbwlrrcb
What's New in STEP 7, Version 5.5?
The following subject areas have been updated:
Operating systems
As of STEP 7 V5.5, the operating systems MS Windows 7 Professional, Ultimate and Enterprise (standard installation) are supported.
Configuring and Diagnosing Hardware
- As of STEP 7 V5.5, you can create I-devices from numerous IO controllers.
- As of STEP 7 V5.5, you can use the PROFINET shared device function.
- As of STEP 7 V5.5, you can assign the IP addresses and device names dynamically.
- As of STEP 7 V5.5, you can configure media redundancy for multiple domains.
- As of STEP 7 V5.5, you can you can configure the isochronous mode for IO devices.
- As of STEP 7 V5.5, you can install hardware updates directly from the "Windows Start menu".
- As of STEP 7 V5.5, you can manage user rights for the Web server.
- As of STEP 7 V5.5, you can access Web pages of the CPU via a secure HTTPS connection.
- As of STEP 7 V5.5, you can configure keepalive times for TCP connections.
- As of STEP 7 V5.5, you can download I&M data for more than one module at the same time (using multiselection).
Configuration Changes during Ongoing Operation (CiR)
The restrictions in STEP 7 versions up to and including V5.4 regarding hardware configuration in RUN (CiR) for PROFIBUS when upgrading the STEP version no longer apply in V5.5.
Standard Libraries
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFB104 "IP_CONF" for program-controlled configuration of the integrated PROFINET interface of your CPU.
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFC99 "WWW" for enabling or synchronizing user Web pages.
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFB73 "RCVREC" for receiving data records and SFB74 "PRVREC" for making data records available on an I-device. These SFBs are only valid for S7-300 CPUs.
- As of STEP 7 V5.5, the system status list with SSL-ID W#16#xy9C has been expanded. This provides information on the configured tool changer and its tools.
- As of STEP 7 V5.5, the following FBs of S7 communication are included: FB28 "USEND_E", FB29 "URCV_E", FB34 "GET_E", FB35 "PUT_E". These are only for S7-300 CPUs and only on connections via the integrated PN interface.
- As of STEP 7 V5.5, the following two FBs for open communication via Industrial Ethernet have new names: FB 210 (previous name: "S5FW_TCP") is now called "FW_TCP", FB 220 (previous name: "S5FW_IOT") is now called "FW_IOT".
Report System Error
- As of STEP 7 V5.5, you can choose whether or not the status of slaves is evaluated when the CPU starts up.
- As of STEP 7 V5.5, the additional texts of messages are displayed or implemented in the "Message Preview", "Print" and "Print Preview" dialogs.
- As of STEP 7 V5.5, you can also download blocks generated by 'Report System Error' in HW Config
System diagnostics
- As of STEP 7 V5.5, there are two "Diagnostics in Hexadecimal Format" dialogs: one for PROFIBUS slaves and one for PROFINET devices.
Setting the PG/PC Interface
As of STEP 7 V5.5, you can use the USB prommer without needing to install additional software. The required functionality is integrated in STEP 7.
The following subject areas have been updated:
Operating systems
As of STEP 7 V5.5, the operating systems MS Windows 7 Professional, Ultimate and Enterprise (standard installation) are supported.
Configuring and Diagnosing Hardware
- As of STEP 7 V5.5, you can create I-devices from numerous IO controllers.
- As of STEP 7 V5.5, you can use the PROFINET shared device function.
- As of STEP 7 V5.5, you can assign the IP addresses and device names dynamically.
- As of STEP 7 V5.5, you can configure media redundancy for multiple domains.
- As of STEP 7 V5.5, you can you can configure the isochronous mode for IO devices.
- As of STEP 7 V5.5, you can install hardware updates directly from the "Windows Start menu".
- As of STEP 7 V5.5, you can manage user rights for the Web server.
- As of STEP 7 V5.5, you can access Web pages of the CPU via a secure HTTPS connection.
- As of STEP 7 V5.5, you can configure keepalive times for TCP connections.
- As of STEP 7 V5.5, you can download I&M data for more than one module at the same time (using multiselection).
Configuration Changes during Ongoing Operation (CiR)
The restrictions in STEP 7 versions up to and including V5.4 regarding hardware configuration in RUN (CiR) for PROFIBUS when upgrading the STEP version no longer apply in V5.5.
Standard Libraries
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFB104 "IP_CONF" for program-controlled configuration of the integrated PROFINET interface of your CPU.
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFC99 "WWW" for enabling or synchronizing user Web pages.
- As of STEP 7 V5.5, the system functions have been expanded by the addition of SFB73 "RCVREC" for receiving data records and SFB74 "PRVREC" for making data records available on an I-device. These SFBs are only valid for S7-300 CPUs.
- As of STEP 7 V5.5, the system status list with SSL-ID W#16#xy9C has been expanded. This provides information on the configured tool changer and its tools.
- As of STEP 7 V5.5, the following FBs of S7 communication are included: FB28 "USEND_E", FB29 "URCV_E", FB34 "GET_E", FB35 "PUT_E". These are only for S7-300 CPUs and only on connections via the integrated PN interface.
- As of STEP 7 V5.5, the following two FBs for open communication via Industrial Ethernet have new names: FB 210 (previous name: "S5FW_TCP") is now called "FW_TCP", FB 220 (previous name: "S5FW_IOT") is now called "FW_IOT".
Report System Error
- As of STEP 7 V5.5, you can choose whether or not the status of slaves is evaluated when the CPU starts up.
- As of STEP 7 V5.5, the additional texts of messages are displayed or implemented in the "Message Preview", "Print" and "Print Preview" dialogs.
- As of STEP 7 V5.5, you can also download blocks generated by 'Report System Error' in HW Config
System diagnostics
- As of STEP 7 V5.5, there are two "Diagnostics in Hexadecimal Format" dialogs: one for PROFIBUS slaves and one for PROFINET devices.
Setting the PG/PC Interface
As of STEP 7 V5.5, you can use the USB prommer without needing to install additional software. The required functionality is integrated in STEP 7.
License Step7 V5.5 nếu bạn cần nó thì download nó ở link dưới đây. Khi chạy chương trình nó sẽ nằm ở cuối cùng của license list!
http://www.mediafire.com/file/82bdsjbxb ... _03_20.rar
hoặc: http://www.mediafire.com/?82bdsjbxbwlrrcb
Nếu các bạn sử dụng license Step7 V5.5 ở trên bị lỗi thì mời bạn dùng license Step7 v5.5 theo file sau:
http://www.mediafire.com/file/o5cignp6a ... _05_09.zip
Chúc các bạn thành công!
Công ty CP dịch vụ và ứng dụng tự động A2S
Liên Hệ
Nguyễn Trọng Huy
Email : lienhe@a2s.vn
Phone : 0903444912
0 nhận xét